Wire cloth 0,045x0,036 phosphor bronze

Main characteristics - Wire cloth 0,045x0,036 phosphor bronze

Trade name

Wire cloth 0,045x0,036-1000-CuSn6 (C51900)-TW

Weaving type

twill

Trade Grade

fine wire cloth

Mesh count (inch)

315

Nominal aperture (W, see fig.1)

0.045 mm

The diameter of the wire (d, see fig.1)

0.036 mm

Standard

ISO 9044

Material

Phosphor bronze

Width (A, see fig.1)

1000 mm

Roll length (B, see fig.1)

30 m, it is possible to unwind from a roll of the required quantity, as well as cutting the mesh into pieces of the required size.

Expended details - Wire cloth 0,045x0,036 phosphor bronze

Trade name

Wire cloth 0,045x0,036-1000-CuSn6 (C51900)-TW

Weaving type

twill

Mesh count (inch)

315

Standard

ISO 9044

Trade Grade

fine wire cloth

Main application

wire screen is used as a working element of equipment for separation materials by fractions (particle sizes), control the geometric dimensions of particles; ; as a filter element for cleaning solutions and mixtures, including filtration of combustible and flammable (gasoline, kerosene, etc.) liquids; gas filtration; for separation of materials and other purposes

Openings per linear 100mm

1235 PCS

Openings per sq/inch

98333 PCS

Percent of open area

31 %

Nominal aperture

0.045 mm

Nominal wire diameter

0.036 mm.
Wire diameter torerance: ±0,0015 mm. During production of wire cloth mesh, thinning of the wire is possible due to its deformation and stretching, therefore, diameter of the wire is measured before refueling on a loom.

Width

1000 mm.
Width tolarance: +2%

Roll length

Standard roll length 30 m. It is possible to unwind from a roll of the required quantity, as well as cutting the mesh into pieces of the required size. At the customer's request, it is possible to supply the mesh in one single piece. According to the ISO 9044 requirement, a roll can consist of several mesh pieces of the same type, while the length of each segment must be at least unless otherwise specified, a standard roll may consist of up to three pieces, no piece less than 3 linear meter.mm

Delivery form

wire cloth is rolled on a cardboard tube. Roll diameter is 0,1±0,05m.

Selvage

screen is made with cut edger

Package

rolls are packed in kraft paper and/or plastic film, loaded into plywood cases or formed on pallets. For small orders, each roll can be packed in an individual cardboard case 1200x170x160mm. Any special packaging must be specified and agreed with the supplier

Theoretical net weight of 1 sq.m mesh

0,2 kg

Material

Material

Phosphor bronze

Material type

Phosphor Bronze - copper 92%, tin 6%

Standard for material

chemical composition according to ASTM B103

Density

8.7 g/cm3

Basic properties

Phosphor bronze is wear-resistant, well processed, well soldered, highly thermally conductive; one of the distinctive operational properties of bronze and brass is that sparks are not created upon impact and friction of a solid sieved against copper alloys, therefore a bronze wire cloth is used in flammable and explosive environments, when sifting materials in cases where it is necessary to avoid sparking

Corrosion resistance

Phosphor bronze is resistant to corrosion in air, in fresh water, in dry halogen gases, in dry steam, in antifreezes, alcohols, freons; relatively stable in alkalis; unstable in wet saturated steam, mine water, oxidizing solutions, chlorides, mineral acids, hydrogen sulfide, fatty acids, environments containing sulfur dioxide or ammonia; bronze wire cloth should not be used in contact with iron, aluminum and zinc due to contact corrosion, leading to its rapid destruction

Operating temperature

melting point about 995°C; annealing temperature 600÷650°C; the alloy retains ductility and does not become brittle when cooled down to helium temperatures