Dutch wire cloth stainless steel 80x700 - photo 2

Dutch wire cloth stainless steel 80x700 meshing scheme - photo 3

Dutch wire cloth stainless steel 80x700 meshing scheme - photo 4

Dutch wire cloth stainless steel 80x700

Name: Dutch wire cloth stainless steel 80x700
Brand: Industrial Wire Mesh Company LLC
SKU: 1643
Price: 43 EUR
Availability: InStock

ASTM E2814

30m roll length

In stock

Shipping within 24 hours

43,00 € / m²

excl. VAT

m²

43,00 €

excl. VAT

Quantity

Markup

Price per m²

to 3 m² inclusive

+ 25%

54 € / м²

from 3 м² up to roll

+ 10%

47 € / м²

Roll unwinding service.

We carry out the cutting of grids into rectangular and square segments according to individual sizes.

Order mesh cutting

Ready

Delivery

Wholesale price

Ask a question

Main characteristics

Wire cloth Dutch wire cloth 80x700-0,12x0,08-1000-AISI 304-TW
Weaving type twill
Mesh count (inch) 80x700
Aperture (opening size) there are no apertures, weft wires are tightly pressed size-to-side to each other
Warp wire diameter 0,12
Weft wire diameter 0,08
Standard ASTM E2814
Width 1000 mm
Standard roll length 30 m, it is possible to unwind from a roll of the required quantity, as well as cutting the mesh into pieces of the required size.
Nominal micron retention * 25-35 µm

Expended details

Wire cloth Dutch wire cloth 80x700-0,12x0,08-1000-AISI 304-TW
Weaving type twill
Mesh count (inch) 80x700
Mesh count denotes count of warp/weft wires pre liner inch
Main application the wire cloth is used for liquid and gas filtration, including in aggressive environments and at high operating temperatures; for filtration of solutions, melts, liquids and gases; for dehydration and drying for producing of filters and filter elements for hydraulic and lubrication systems, filter elements and separators for liquids, parts of filter materials and replaceable cartridges;
Standard ASTM E2814
Nominal micron retention * 25-35 µm
Absolute micron retention 40
Nominal aperture celdas cero (es decir, no existen aberturas, los alambres de la trama están fuertemente presionados entre sí, lado a lado).
Theoretical mass of 1 sq.m mesh 1.3 kg
Warp mesh count and tolerance 80 wires per 1 inch cloth width tolerance: ±2%
Weft mesh count and tolerance 700 wires per 1 inch cloth length
tolerance: ±4%
Warp wire diameter 0,12
with a tolerance of ±0,005mm due the mechanical deformation of warp wire during weaving, the diameter measured after weaving can only be used as a guide to the original nominal diameter
Weft wire diameter 0,08
with a tolerance of ±0,005mm due the mechanical deformation of weft wire during weaving, the diameter measured after weaving can only be used as a guide to the original nominal diameter
Width 1000 mm.
Width tolarance: ±1%
Theoretical thickness 0.28 mm
Warp mesh count per 100mm (nominal) 315 PCS
Longitud del rollo Longitud estándar del rollo 30 m.
Es posible desenrollar de un rollo la cantidad requerida, así como cortar piezas del tamaño necesario. Según el requisito de la norma ASTM E2814, un rollo puede constar de varias piezas de malla del mismo tipo, debiendo la longitud de cada segmento ser de al menos 1 m. A petición del cliente, es posible suministrar la tela metálica en una sola pieza.
Delivery form wire cloth is rolled on a cardboard tube. Roll diameter is 20(±5) cm.
Selvage the mesh is made with cut edges
Package rolls are packed in kraft paper and/or plastic film, loaded into plywood cases or formed on pallets. For small orders, each roll can be packed in an individual cardboard case 1200x170x160mm. Any special packaging must be specified and agreed with the supplier

Material

Standard for material chemical composition according to ASTM A580
Density 7.92 g/cm3
Basic properties Type 304 (T-304) of USA standard AISI is the universal and the most widely used austenitic steel in the industry; weldability is good, but due to the lack of titanium, the weld seam (except for contact welding) is subject to intergranular corrosion; Steel Type 304 is used more widely when subsequent heat treatment (hardening) and cold deformation is necessary, as parts of furnace fittings, heat exchangers, muffles, rotors, nozzles and collectors of exhaust systems, electrodes of spark plugs, etc.; weakly magnetic, practically non-magnetic in the heat-treated state; good resistance to atmospheric and intergranular corrosion in combination with heat resistance, stability, strength, ease of processing, the possibility of use in a wide range of temperatures made this brand of steel one of the most produced and used around the world in various industries, including for the manufacture of machine parts and food and trade machine-building equipment, consumer goods. Type 304L stainless steel wire mesh is the same as Type 304 stainless steel wire mesh, except for its extra-low carbon content which allows for superior welding. Specifically, the low carbon content helps to minimize carbide precipitation when welding, allowing T-304L wire cloth to be used without subsequent annealing of the weld joints, even in corrosive environments. Stainless steel Type 304 and 304L is non-magnetic when annealed and slightly magnetic when cold finish. Chemical composition and main properties of wire steel grade AISI 304 of ASTM A580-18 corresponds to the requirements to steel grade ISO name X5CrNi18-10 (number 4301-304-00-I) according to ISO 15510-2014 and steel grade EN 1.4301 (X5CrNi18-10) according to ЕN 10088-3:2014.
Comparative corrosion AISI T-304 and T-304L stainless steel has good resistance to atmospheric and intergranular corrosion, including in saturated steam, when operating at high and low temperatures and in aggressive environments, in solutions of nitric, acetic, phosphoric acids, alkali solutions and salts, in sea water; steel grade AISI 304 is recommended for use as corrosion-resistant; used in highly aggressive environments; steel grade AISI 304 is unstable in sulphurous environments
Operating temperature the recommended operating temperature is not more than 420 ° C in terms of corrosion resistance; not more than 710°С in terms of mechanical parameters; melting point 1400°С

Dutch wire cloth stainless steel 80x700

IASTM E2814

30 roll length

In stock

Shipping within 24 hours

43,00 € / m²

excl. VAT

m²

43,00 €

excl. VAT

Quantity

Markup

Price per m²

to 3 m² inclusive

+ 25%

54 € / м²

from 3 м² up to roll

+ 10%

47 € / м²

Roll unwinding service.

We carry out the cutting of grids into rectangular and square segments according to individual sizes.

Order mesh cutting

Ready

Delivery

Wholesale price

Ask a question

NEED HELP TO CHOOSE?

To receive a quote for filter elements, please fill out the contact form or call our sales managers. You can also email us to receive a detailed consultation on delivery times and pricing for reusable metal filters.

Oleksii Busov

Sales Manager