Dutch wire cloth low carbon 14x88 - photo 2

Dutch wire cloth low carbon 14x88 - photo 3

Dutch wire cloth low carbon 14x88 meshing scheme - photo 4

Dutch wire cloth low carbon 14x88 meshing scheme - photo 5

Dutch wire cloth low carbon 14x88

Name: Dutch wire cloth low carbon 14x88
Brand: Industrial Wire Mesh Company LLC
SKU: 1890
Price: 8.4 EUR
Availability: InStock

ASTM E2814

30m roll length

In stock

Shipping within 24 hours

8,40 € / m²

excl. VAT

m²

8,40 €

excl. VAT

Quantity

Markup

Price per m²

to 3 m² inclusive

+ 25%

11 € / м²

from 3 м² up to roll

+ 10%

9 € / м²

Roll unwinding service.

We carry out the cutting of grids into rectangular and square segments according to individual sizes.

Order mesh cutting

Ready

Delivery

Wholesale price

Ask a question

Main characteristics

Wire cloth Dutch wire cloth 14x88-0,5x0,315-1000-LC.Q195-PW
Weaving type plain
Mesh count (inch) 14x88
Aperture (opening size) there are no apertures, weft wires are tightly pressed size-to-side to each other
Warp wire diameter 0,50
Weft wire diameter 0,32
Standard ASTM E2814
Width 1000 mm
Standard roll length 30 m, it is possible to unwind from a roll of the required quantity, as well as cutting the mesh into pieces of the required size.
Nominal micron retention * 195-205 µm

Expended details

Wire cloth Dutch wire cloth 14x88-0,5x0,315-1000-LC.Q195-PW
Weaving type plain
Mesh count (inch) 14x88
Mesh count denotes
Main application the wire cloth is used for liquid and gas filtration, including in aggressive environments and at high operating temperatures; for filtration of solutions, melts, liquids and gases; for dehydration and drying for producing of filters and filter elements for hydraulic and lubrication systems, filter elements and separators for liquids, parts of filter materials and replaceable cartridges;
Standard ASTM E2814
Nominal micron retention * 195-205 µm
Absolute micron retention 250
Nominal aperture celdas cero (es decir, no existen aberturas, los alambres de la trama están fuertemente presionados entre sí, lado a lado).
Theoretical mass of 1 sq.m mesh 3.1 kg
Warp mesh count and tolerance 14 wires per 1 inch cloth width tolerance: ±2%
Weft mesh count and tolerance 88 wires per 1 inch cloth length
tolerance: ±4%
Warp wire diameter 0,50
with a tolerance of ±0,010mm due the mechanical deformation of warp wire during weaving, the diameter measured after weaving can only be used as a guide to the original nominal diameter
Weft wire diameter 0,32
with a tolerance of ±0,010mm due the mechanical deformation of weft wire during weaving, the diameter measured after weaving can only be used as a guide to the original nominal diameter
Width 1000 mm.
Width tolarance: ±1%
Theoretical thickness 1.13 mm
Warp mesh count per 100mm (nominal) 55 PCS
Longitud del rollo Longitud estándar del rollo 30 m.
Es posible desenrollar de un rollo la cantidad requerida, así como cortar piezas del tamaño necesario. Según el requisito de la norma ASTM E2814, un rollo puede constar de varias piezas de malla del mismo tipo, debiendo la longitud de cada segmento ser de al menos 1 m. A petición del cliente, es posible suministrar la tela metálica en una sola pieza.
Delivery form wire cloth is rolled on a cardboard tube. Roll diameter is 22(±5) cm.
Selvage the mesh is made with cut edges
Package rolls are packed in kraft paper and/or plastic film, loaded into plywood cases or formed on pallets. For small orders, each roll can be packed in an individual cardboard case 1200x170x160mm. Any special packaging must be specified and agreed with the supplier

Material

Standard for material chemical composition according to EN 10025-1
Density 7.85 g/cm3
Basic properties Low-carbon wire is the most common and cheapest alloy of ordinary steel used in the production of industrial wire cloth screens due to its tensile strength and high impact resistance. They mainly consist of iron, the most commonly used grades 1005, 1006 and 1008 with a low carbon content and contain a small percentage of carbon (0.0-0.1%), manganese (0.0-0.5% - which increases strength) , phosphorus (0.0-0.04%) and sulfur (0.0-0.05%). Poor abrasion resistance and poor corrosion resistance may limit use in certain applications, but a variety of special protective coatings can be applied to improve resistance. Galvanizing (before or after) is the most economical way to protect against corrosion. As an alternative, a protective tin coating is often used on mud screens (canning mill). In addition, steel wire fabric can be protected with epoxy coatings, PVC/vinyl coatings and our electrostatic powder coating.
Comparative corrosion steel does not have corrosion resistance

Dutch wire cloth low carbon 14x88

IASTM E2814

30 roll length

In stock

Shipping within 24 hours

8,40 € / m²

excl. VAT

m²

8,40 €

excl. VAT

Quantity

Markup

Price per m²

to 3 m² inclusive

+ 25%

11 € / м²

from 3 м² up to roll

+ 10%

9 € / м²

Roll unwinding service.

We carry out the cutting of grids into rectangular and square segments according to individual sizes.

Order mesh cutting

Ready

Delivery

Wholesale price

Ask a question

NEED HELP TO CHOOSE?

To receive a quote for filter elements, please fill out the contact form or call our sales managers. You can also email us to receive a detailed consultation on delivery times and pricing for reusable metal filters.

Oleksii Busov

Sales Manager